background image

For complete list of sales and manufacturing sites, please visit 

www.emerson.com/actuationtechnologieslocations

 

or contact us at 

[email protected]

World Area Confi guration Centers (WACC) offer sales support, service, 
inventory and commissioning to our global customers. 
Choose the WACC or sales offi ce nearest you:

NORTH & SOUTH AMERICA

19200 Northwest Freeway
Houston TX 77065
USA
T +1 281 477 4100

Av. Hollingsworth 
325 Iporanga Sorocaba 
SP 18087-105
Brazil
T +55 15 3413 8888

ASIA PACIFIC

No. 9 Gul Road
#01-02 Singapore 629361
T +65 6777 8211

No. 1 Lai Yuan Road
Wuqing Development Area
Tianjin 301700
P. R. China
T +86 22 8212 3300

MIDDLE EAST & AFRICA

P. O. Box 17033
Jebel Ali Free Zone
Dubai
T +971 4 811 8100

P. O. Box 10305
Jubail 31961
Saudi Arabia
T +966 3 340 8650

24 Angus Crescent
Longmeadow Business Estate East 
P.O. Box 6908 Greenstone 
1616 Modderfontein Extension 5
South Africa
T +27 11 451 3700

EUROPE

Holland Fasor 6
Székesfehérvár 8000
Hungary
T +36 22 53 09 50 

Strada Biffi 165
29017 Fiorenzuola d’Arda (PC)
Italy
T +39 0523 944 41

1

www.emerson.com/eim

©2018 Emerson. All rights reserved. 

The Emerson logo is a trademark and service mark of Emerson Electric Co. 
EIM

TM

 is a mark of one of the Emerson family of companies. 

All other marks are property of their respective owners.

The contents of this publication are presented for information purposes 
only, and while every effort has been made to ensure their accuracy, 
they are not to be construed as warranties or guarantees, express or 
implied, regarding the products or services described herein or their use 
or applicability. All sales are governed by our terms and conditions, which 
are available on request. We reserve the right to modify or improve the 
designs or specifications of our products at any time without notice.

Summary of Contents for EIM TEC2 500



















Reviews: