6
•
E2 RX/BX/CX I&O Manual
Lighting Control Problems
Lights will not come on.
Make sure you have a Time Schedule set up. A
Time Schedule is not Lighting Control. You can use
the same Time Schedule for several Lighting Con-
trols. Set up the Time Schedule first and then assign
it to a Lighting Control.
Set up a Time Schedule and got to Lighting Con-
trol. Choose the desired application and press
(SETUP). Move the cursor to C7 (Inputs) and high-
light the Board field. Press
(LOOK UP),
choose the input device and press
.
Highlight
the Point field and press
(LOOK UP). Select
the type of schedule and press
.
Make sure Lighting Control output is assigned.
Lights Will Not Come On
With The Photocell
Photocell is not recognized by
controller.
Make sure the photocell is configured as an analog
input.
Verify that the type of light sensor is correct.
If using a light level sensor from another E2 con-
troller, set it up on the controller it is associated
with in the Global Data section.
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
