Figure 3-5
- COM1 Baud Rate Setup (Serial RS232)
12
•
E2 RX/BX/CX I&O Manual
3.4.2
I/O Network Baud Rate
The I/O Network baud rate is the rate at which the E2
will communicate with input and output boards on the
RS485 I/O Network, and is located directly below the
RS232 Baud
rate field.
Press
to select the baud rate. The appropriate
baud rate is
9600 baud
.
Figure 3-6
- I/O Network Baud Rate Setup
3.5
Set Up User Access
Access the User Access Setup screen from the System
Information menu:
1.
Press
to open the Main Menu.
2.
Press
(System Configuration).
3.
Press
(System Information).
Figure 3-7
- System Information Menu
In the User Access Setup screen, you may add user
names and passwords to the controller with varying levels
of security, and customize user access for each security
level.
To access this menu, choose option
(Passwords/
User Access) from the System Information Menu.
Figure 3-8
- User Access Setup Screen
An E2 may be programmed with up to 25 different
users. A user basically consists of a username, a password,
and an access level. Whenever a username and password
are entered during login, the E2 searches the user records
