1592012000 XF330M XF331M XF332M GB REL1.0 31.08.2015
XF330M XF331M XF332M
6/12
7.1.2
When the controller is in stand by
1.
Push the
PRG
key
: on the TIME display
the label of the Prg1 program is showed and the led
of the PRG key is turned on.
2.
Select the program using the UP and DOWN keys
of the TIME display.
3.
Press again the
PRG
key, the led of the
SET
and
TIMER
keys are turned on and the displays show
respectively the target set points and the cooking
time of the programme. The led of the
PRG
key now
is flashing.
4.
To change the set points and the cooking time push
UP and DOWN buttons on the right of every display
5.
Push and release PRG key to confirm.
6.
The program is momorized and the label of the
following program is displayed.
7.
To modified it repeat the operation starting from
point 3.
7.2
How to enable a programme
1.
Push the
PRG key
: the TIME display will
show Prg1 label and the LED of the PRG key will be
turned on.
2.
Browse the programmes by pushing UP and DOWN
keys on the right of the timer display
3.
Confirm
the program pushing again the
PRG
key.
The LEDs of the
SET
and
TIMER
keys are turned
on and the displays show respectively the target set
points and the cooking time of the programme.
How to disabled the current programme
1.
When the LED is on, push the
PRG
key.
2.
To stop the programme in progress, push the
START
key till its LED is turned off, then repeat the operation
described at point 1.
7.3
How to start the current program
After selecting a programme (the PRG LED is on), push
the START key to start the cooking cycle.
8.
Steam
8.1
Steam generator (Not present in XF332M)
By pushing the
STEAM
key
the relay of the
steam generator is switched. The status of the Generator
is monitored by the led: if the led is ON the generator is
working, if the LED is off the generator is off.
XF331M:
the XF331M is provided with a
digital input
working at line voltage (
terminals 21-22) enabling the
steam injection. When the steam is not available the LED
oft the
STEAM
key
is flashing.
8.2
Steam injection
If the LED oft the
STEAM
key
is on the injection
is enabled.
There are
2 kinds of injection cycles
:
Single cycle
Repetitive cycle
During the
single cycle
(
ccy=Sin
) the steam output
remains on for a certain time settable directly by the
keyboard.
During the
repetitive cycle
(
ccy=riP
) the steam output
performs 60s cycles. The duty cycle is settable directly by
the keyboard.
The steam
injection
is established by the Acy parameter
according to the following: :
Manual
injection by the key
Automatic
injection
With
manual
injection (
Acy=MAn
) the steam is injected
only when the key is pushed.
With
automatic
injection (
Acy=AUt
) the steam is
automatically injected at cooking cycle starting.
After a steam injection, an
inhibition time
is started (par.
tCy
) during this period the steam injection is disabled.
8.3
How to set the steam injection time
The steam injection time is settable directly by the
keyboard:
The maximum settable injection time depends on the
HSi parameter.
With HSi=0 steam is injected as long as the key is
pressed.
1.
To set the injection time push the
INJECTION
key
for at least 3s.
