19
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF411
7. Final Assembly
(Continued)
THREADED STUDS (2)
HANGER BRACKET
Figure 30
7.4
Screw the 1-1/4” Threaded Studs into the threaded holes
on the bottom of the Hanger Bracket with your fingers
(Figure 30).
7.5
Lift the Ceiling Cover up to the Threaded Studs and turn
until studs protrude through the holes in the Ceiling Cover
(Figure 31).
Secure the Ceiling Cover in place by sliding Lockwashers
over the Threaded Studs and installing the two Knurled
Knobs (supplied in hardware bag). (Figure 31).
Tighten the Knurled Knobs securely until the Ceiling Cover
fits snugly against the ceiling and the hole in the Ceiling
Cover is clear of the Downrod.
KNURLED KNOBS (2)
LOCKWASHERS (2)
THREADED STUDS (2)
CEILING COVER
Figure 31
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and not
pinched between the ceiling cover and the ceiling.
WARNING
!
To avoid possible fire or shock, make sure that antenna
wire is not pinched between the ceiling cover and the
ceiling.
WARNING
!
You have now completed the complete assembly of your
new ceiling fan.
Please call Emerson technical support at
1-800-654-3545 if you have any questions
about installation and operation of this ceiling fan.