7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF411
DOWNROD
CEILING
COVER
6 TO 9
INCHES
HANGER BALL
WHITE WIRE
BLACK WIRE
1/2-INCH
BLUE WIRE
Figure 7
3.7
The fan comes with Black, Blue and White Wires that are
80” long.
Measure up approximately 6 to 9-inches above top of
Hanger Ball / Downrod Assembly (Figure 7).
Cut off excess Wires and strip back insulation 1/2-inch
from end of Wires.
PARTIALLY
ASSEMBLED FAN
SOLID
STYROFOAM
FACING OUT
6" - 8"
GAP
Figure 8
3.8
Turn Fan Motor Assembly upside down in preparation for
mounting fan blades.
Position the top and bottom halves of the Styrofoam
packaging on end, with solid styrofoam facing outward.
Set side-by-side on the floor with a six to eight-inch gap
between the halves (Figure 8).
Carefully place the partially assembled Ceiling Fan on the
Styrofoam Halves, with the Hanger Ball / Downrod
Assembly positioned in the gap and the Fan Motor
Assembly resting on top of the styrofoam ends.
3. Ceiling Fan Assembly
(Continued)
