manualshive.com logo in svg

Emerson Copeland Scroll ZP K3 Series, Bulletin

Share
Download
Emerson Copeland Scroll ZP K3 Series Bulletin Download Page 25

25

© 2015 Emerson Climate Technologies, Inc.

AE4-1365 R4

Table 4 – Compressor Accessories 

Continued

Part 

Category

Part Description

Part Number

Models

Notes

1/2" Discharge Stub to 1"-14 

Rotalock Adapter

036-0538-00

ZP50-57K3    

ZP61-83KC

3/4" Discharge Stub to 1-1/4"-12 

Rotalock Adapter

998-0034-01

ZP91KC

7/8" Discharge Stub to 1-1/4"-12 

Rotalock Adapter

998-0034-02

ZP104-143KC

7/8" Suction Stub to 1-1/4"-12 

Rotalock Adapter

998-0034-02

ZP50-57K3     

ZP61-91KC

1-1/8" Suction Stub to 1-3/4"-12 

Rotalock Adapter

TBD

ZP104-143KC

Suction Manifold

Manifolds are not available for sale to the aftermarket.  

Contact Application Engineering if drawings of manifolds are needed.

Discharge Manifold
Oil Equalization Tube
Gas Equalization Manifold

Mounting Kit, Compressor To 

Rails

527-0181-00

ZPT100-114K3   

ZPT122-182KC

2 kits required per tandem; 

Includes bolts, washers, and steel 

spacers

Mounting Kit, Compressor To 

Rails

527-0182-01

ZPT208-286KC

2 kits required per tandem; 

Includes bolts, washers, and steel 

spacers

Tandem Mounting Kit, Rails To 

Unit

527-0150-00

ZPT100-114K3   

ZPT122-182KC

Includes sleeves, washers, and 

grommets (35-45 durometer)

Tandem Mounting Kit, Rails To 

Unit

527-0177-00

ZPT208-286KC Includes sleeves, washers, and 

grommets (65-75 durometer)

Tandem Rail

074-1235-00

ZPT100-114K3   

ZPT122-182KC 2 rails required per tandem

Tandem Rail

574-0053-00

ZPT208-286KC 2 rails required per tandem

Tandems

 Suction & Discharge              

(continued)

The contents of this publication are presented for informational purposes only and are not to be construed as warranties or guarantees, express or implied, regarding the products or 

services described herein or their use or applicability. Emerson Climate Technologies, Inc. and/or its affiliates (collectively "Emerson"), as applicable, reserve the right to modify the design or 

specifications of such products at any time without notice. Emersondoes not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, 

use and maintenance of any Emerson product remains solely with the purchaser or end user.

Summary of Contents for Copeland Scroll ZP K3 Series


























Reviews:

No comments

Brands by name

Popular brands

Load more brands