9
AE5-1412 R1
© 2016 Emerson Climate Technologies, Inc.
6.7. Changing Clock Setting
6.8. Refrigerant Selection
Using parameter REF set the refrigerant as follows
(refer to nameplate for approved refrigerants):
Refrigerant
rEF
R-404A
404
R-507
507
R-134A
134
R-22
r22
R-407C
07C
R-407A
07A
R-407F
07F
R-448A
48A
R-449A
49A
+
6.9. Fast Access Menu
This menu allows viewing measured values from
various probes and view some outputs resulting from
these measurements. The values nP or noP stand for
probe not present or value not evaluated. Err means the
value is out of range, probe is damaged, not connected,
or incorrectly configured.
Press
to enter the Fast Access Menu.
Use
or
arrows to select an entry, then press
to see the value or to go on with other value.
TO EXIT:
Press
or wait 60 seconds
without pressing the keys.
6.9.1. List of Fast Access Parameters:
P1P Suction pressure
P2t Condenser temperature
P2P Not Used
P3t Discharge line temperature
P4t EVI heat exchanger vapor inlet temperature
(XFAL only)
PSt EVI heat exchanger vapor outlet
temperature (XFAL only)
P6t Ambient temperature
P7t Liquid line temperature (XFAL only)
5H
Not used
oPP Percentage of liquid injection (XFAP/
XFAM) or vapor injection (XFAL) valve
opening.
LLS Not used
Std Current condenser temperature target for
fan speed control
A00 Fan speed percent
d5o Not used
L t
Not used
H t
Not used
tU1 Line voltage (1-phase)
tU2 Line voltage (3-phase)
tU3 Line voltage (3-phase)
tA1 Current (1-phase)
tA2 Current (3-phase)
tA3 Current (3-phase)
HM Menu
