Page -
4
PIP-ControlWaveLS
Section 2
LOOP SUPPLY INSTALLATION
2.1 LOOP SUPPLY MOUNTING
Encapsulated Loop Supply Assemblies are provided with the printed circuit board (PCB)
secured to a Power Supply Back Plate Bracket and protected by a Power Supply Board
Cover. These units may be mounted directly to a panel or to a 35mm DIN Rail. Board only
Loop Supply’s are typically Snap Track mounted (as is the case with the
Control
Wave
EFM
). Figure 2 shows a Snap Track Mounted unit while Figure 3 provides dimensions for
the “Encapsulated” Loop Supply. Table 3 below provides the type of Loop Supply and
mounting arrangement typically associated with the various
Control
Wave series RTUs.
Table 3 - ControlWave RTU and Loop Supply Assignments
Control
Wave
Series
Loop Supply Type Mounting Notes
Control
Wave
MICRO
Encapsulated Externally
Control
Wave
EFM
Snap Track Mounted
Internally
Control
Wave
GFC
Snap Track Mounted
Internally
Control
Wave
Express
Encapsulated Externally
Control
Wave
ExpressPAC
Snap Track Mounted
Internally
Figure 2 - Snap Track Mounted Loop Supply
(Typically used in Conjunction with a Power Distribution Board)
(Shown Mounted to the Control
Wave
EFM Fabrication Panel)
Summary of Contents for ControlWave MICRO
Page 14: ...PIP ControlWaveLS Page 5 Figure 3 Encapsulated ControlWave Loop Supply Mounting Diagram ...
Page 16: ...PIP ControlWaveLS Page 7 Figure 4 ControlWave MICRO EFM Loop Supply to I O Module Wiring ...
Page 21: ...Page 12 PIP ControlWaveLS Figure 6 Loop Supply Dimensions Drawing ...
Page 23: ...Return to the Table of Contents Return to the List of Manuals ...
