6
ETL Model No.: CF766L
3. Ceiling Fan Assembly
(Continued)
3.4
Position the Upper Housing, aligning its two Notched
Areas, the Six Screw Holes and the Reverse Switch
Hole onto the Upper Motor Housing Flange (Figure 4).
TH
IS
S
ID
E U
P
T H I S S I D E U P
T H I S S I D E U P
UPPER
HOUSING
REVERSE
SWITCH
MOTOR COUPLER
STUDS (2)
NOTCHED
AREAS (2)
REVERSE
SWITCH
HOLE
Figure 4
3.5
Place the Upper Housing Plate so that the two Notched
Areas align with the two Studs on the Motor Coupler.
Aligning the six Screw Holes of the Upper Housing
Plate onto the Upper Housing.
Securely attach the Upper Housing Plate to the Upper
Housing by using the six #8-32 x 1/2” Pan Head
Screws with Lockwashers (supplied) (Figure 5).
T H I S S I D E U P
S I D E U P
#8-32 x 1/2" PAN
HEAD SCREWS WITH
LOCKWASHERS (6)
MOTOR
COUPLER
MOTOR
COUPLER
STUDS (2)
UPPER
HOUSING
PLATE
Figure 5
3.6
Remove the Hanger Ball by loosening the Set Screw in
the Hanger Ball until the Ball falls freely down the
Downrod (Figure 6).
Remove the Pin from the Downrod, then remove the
Hanger Ball.
Retain the Pin and Hanger Ball for reinstallation in
Step 3.12.
NOTE: Do not loosen the Screw holding the Green
Ground Wire.
PHILLIPS HEAD SET SCREW (LOOSENED)
HANGER BALL
DOWNROD
PIN
GREEN GROUND WIRE
Figure 6
Summary of Contents for CF766LBQ00
Page 90: ...Notes 90 Modèle ETL N CF766L ...