Emerson CF766LBQ00, Owner'S Manual

Page: 20 / 92

20
ETL Model No.: CF766L
8. Wall Control Installation
(Continued)
8.3
Before installing the Wall Control, place the Wall Control
in “OFF” mode by pushing “ON/OFF” Switch to the
“OFF” position.
8.4
Connect one Black Wire of the Wall Control to the “hot”
Wire. Securely connect Wires with Wire Connectors
supplied (Figure 32).
8.5
Connect one Black Wire of Wall Switch to the “load”
(black) Wire in Wall Box. Securely connect Wires with
Wire Connector, supplied.
8.6
Screw the Wall Control into Wall Box using the supplied
Screws. Leave the Wall Control in “OFF” mode until
Fan installation is completed.
8.7
The Wall Control is supplied with a White, Ivory, and
Almond color Switch Covers. Choose the finish that
best suits your needs and snap the Cover onto the Wall
Control (Figure 32).
8.8
Install Decorator Wall Plate using the two Screws
provided with Wall Plate. Leave the Wall Control in
“OFF” mode until Fan installation is completed
(Figure 32).
FAN/LIGHT WALL
CONTROL
WALL
BOX
BL
AC
K
BL
K
HOT
NEUTRAL
WIRES
DECORATIVE WALL PLATE
SCREWS (2)
SWITCH COVER
T
O 1
20VAC SO
URCE
T O LOAD
G
R
OU
ND
OFF
ON
....
OFF
ON
....
Figure 32
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
WARNING
!
Do not connect any neutral (white) wire to this control.
Incorrect wiring will damage this control.
WARNING
!