3. Ceiling Fan Assembly
(Continued)
6 TO 9
INCHES
HANGER BALL
WHITE WIRE
BLACK WIRE
1/2-INCH
Figure 8
3.8
The fan comes with black and white leads that are
80” long.
Measure up approximately 6 to 9-inches above top of
hanger ball/4.5” downrod assembly (Figure 8).
Cut off excess leads and strip back insulation 1/2-inch from
end of leads.
PIN
HANGER BALL
4.5" DOWNROD
PHILLIPS HEAD
SET SCREW
Figure 7
3.7
Route the two motor leads through the hanger ball
(Figure 7).
Reinstall the hanger ball on the downrod as follows:
Position the pin through the two holes in the downrod and
align the hanger ball so the pin is captured in the groove in
the top of the hanger ball (Figure 7).
Pull the hanger ball up tight against the pin and securely
retighten the Phillips head screw in the hanger ball
(Figure 7).
A loose Phillips head screw could create fan wobble.
7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF5200
BP7511-1 CF5200 Penbrooke Select Eco.qxp_ BP7511 2/8/16 12:02 PM Page 7
