8. Wall Control Installation
(Continued)
8.4
Before installing wall control, place wall control in “OFF”
mode by pushing “ON/OFF” switch to the “OFF” position.
8.5
Connect one black wire of wall control to the “hot” wire.
Securely connect wires with wire connectors supplied
(Figure 28).
8.6
Connect one black wire of wall switch to the “load” (black)
wire in wall box. Securely connect wires with wire
connector supplied.
8.7
Screw wall control into wall box using the supplied screws.
Leave wall control in “OFF” mode until fan installation is
completed.
8.8
The wall control is supplied with a white, ivory, and almond
color switch covers. Choose the finish that best suits your
needs and snap the cover onto the wall control (Figure 28).
8.9
Install decorator wall plate using the two screws provided
with wall plate. Leave wall control in “OFF” mode until fan
installation is completed (Figure 28).
SW605 FAN/LIGHT
WALL CONTROL
WALL BOX
BL
AC
K
BL
K
HOT
SWITCH COVER
DECORATIVE WALL PLATE
SCREWS (2)
NEUTRAL
WIRES
TO
120V
AC SOURCE
TO
LOAD
G
R
O
U
ND
Figure 28
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
WARNING
!
Do not connect any neutral (white) wire to this control.
Incorrect wiring will damage this control.
WARNING
!
19
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF5200
BP7511-1 CF5200 Penbrooke Select Eco.qxp_ BP7511 2/8/16 12:02 PM Page 19
