8
U.L. Model No.: CF135
SHIPPING
SPACERS (5)
MOTOR
HUB
Figure 10
3.10
Carefully flip the partially assembled ceiling fan and
position the it on the carton styrofoam (Figure 10).
Position the fan so that the bottom of the motor is
facing up.
Remove and discard the five rubber shipping spacers and
spacer screws using a Phillips head screw driver. The motor
hub must be able to move and free from the rubber spacers
before you install the blade assemblies (Figure 10).
6 to 9-inches
1/2-inch
Figure 9
3.9
The fan comes with black, blue and white leads that are
80-inches long.
Measure up approximately 6 to 9-inches above top of
hanger ball/4.5” downrod assembly (Figure 9).
Cut off excess leads and strip back insulation 1/2-inch from
end of leads using wire strippers.
3. Ceiling Fan Assembly
(Continued)
