Emerson AV101 Owner'S Manual Download

Page: 44 / 50

Additional

Information

Troubleshooting

If you experience any of the following difficulties while

using the system, use this troubleshooting guide to help

you remedy the problem. Should any problem persist,

consult your nearest service center by calling

1-800-695-0098.

No power.

Is the power cord firmly plugged into the power outlet?

One of the safety mechanisms may be operating. In

this event, unplug the player from the power outlet briefly

and then plug it in again.

No picture.

Check that the system is connected securely.

The video connecting cord is damaged. Replace it with

a new one.

Make sure you connect the system to the video input

connector on the TV (see page 17).

Make sure you turn on the TV.

Make sure you select the video input on the TV so that

you can view the pictures from this system.

Noise (interference) appears in the picture.

Clean the disc.

If video from this system has to go through your VCR to

get to your TV, the copy-protection applied to some DVD

programs could affect picture quality. If you still experience

problems after checking your connections, please try

connecting your DVD system directly to your TV

S-Video input, if your TV is equipped with this input

(see page 14).

The aspect ratio of the screen cannot be changed even
though you set TV DISPLAY

in the SETUP menu when

you play a wide picture.

The aspect rate is fixed on your DVD disc.

If you connect the system with the S-Video cable,

connect directly to the TV. Otherwise, you may not

change the aspect ratio.

Depending on the TV, you may not be able to change

the aspect ratio.

There is no sound or only a very low-level sound is heard.

Check that the speakers and components are

connected securely.

Make sure that you have selected the correct source

on the system.

Press MUTE button on the remote control if MUTING is

blinking on the front panel.

The protective device on the system has been

activated because of a short circuit. Turn off the

system, eliminate the short-circuit problem and turn

on the power again.

The audio connecting cord is damaged. Replace it with

a new one.

The system is in pause mode or in slow-motion play

mode, or fast forward or fast reverse is performed

Press PLAY (

) to return to normal play mode.

Summary of Contents for AV101



















































Search results

Summary of Contents for AV101

Reviews:

Related manuals for AV101

Brands by name

Popular brands

Emerson AV101, Owner'S Manual

Search results

Summary of Contents for AV101

Reviews:

Related manuals for AV101

Brands by name

Popular brands