Contact
Name
Description
1
24V DC IN
Input power
2
IN
x
Positive logic input
x
3
GROUND
Ground (3-wire sensors
4
IN
x +1
Positive logic input
x +1
5
PE
Earth
ASinterface CONNECTORS - SERIES 881
51
46
22
2
1
5
31
2
3
51
46
70
22
2
1
5
1
31
2
3
51
46
70
22
2
1
5
1
31
2
3
1
2
4
3
5
DIMENSIONS AND WEIGHTS
■
ASinterface connector with 3-pin DIN 46244 plug
(size 22)
•
Without input
•
With M12 input (Version A)
•
With M12 input (Version B)
Weight: 38 g
Weight: 54 g
Weight: 54 g
■
ASinterface connector with ISO 4400 / DIN 43650-A plug
(size 30)
•
Without input
•
With M12 input (Version A)
•
With M12 input (Version B)
Weight: 42 g
Weight: 58 g
Weight: 58 g
43
30
1
2
3
51
5
31
2
3
43
68
30
51
5
1
1
2
3
31
2
3
43
68
30
51
5
1
1
2
3
31
2
3
■
Connection to M12 connector
Input wiring diagram
Male connector thread side view
●
2-wire sensor
●
3-wire sensor
(e.g. solid state)
1
2
4
3
5
+
-
+
-
IN
x
Sensor
x
GND
IN
x
IN
x+1
24V
24V
IN
x+1
Sensor
x+1
GND
24V
24V
Sensor
x
Sensor
x+1
■
Input signal addressing
D0, D1, D2, D3: data bits for ASinterface slave (one non two-directional node)
If the ASinterface network is configured with an ASinterface coupler
integrated in the PLC, the following ASCO/JOUCOMATIC ASinterface connector
identification codes apply
I/O
code
ID-code
ASCO/JOUCOMATIC connector
identification code
11 (or BH)
15
ASinterface connectors are non rotatable
MS-P522
1
5 female pins M12 base for input
2
Yellow cable (ASinterface)
3
Black cable (power supply)
Connector
D0
D1
D2
D3
No input
Output (coil)
Not used
Not used
Not used
With inputs
Output (coil)
Not used
Input 1
Input 2
Compatible with inductive detectors if the leak current is less than 0.3 mA
with a switching threshold, at ground state, of less than 4V.
■
ELECTRICAL CHARACTERISTICS
Connector with M12 input :
• M12 base, 5 female pins
• Designed for 1 or 2 inputs
• M12 connector contact 1 current (24 V): <200 mA
• Load current per entry: 2.4 mA
• Trigger level of one input : 0,36 mA
• Logic level for inputs:
- High : +10 . . . 30 V DC
- Low : -30 . . . 2.5 V DC
This product complies with the essential
requirements of the EMC-Directive 89/336/EEC
and amendments. Certified
CE
. A separate
Declaration of Conformity is available on request.
A separate Declaration of Incorporation relating to EEC-
Directive 89/392/EEC Annex II B is available on request.
Please provide acknowledgement number and serial
numbers of products concerned.
