INSTALLATION INSTRUCTIONS
LFH200 Cable
This guide describes how to use the National Instruments LFH200 cable to connect the
NI PXI-2569/2570/2571/2575 or SCXI-1169/1175 switch module to your system.
The LFH200 cable is available in three configurations:
•
SH200LFH-4xDB50F-C—Recommended for use with the PXI-2569/2570/2571 or
SCXI-1169.
•
SH200LFH-4xDB50F-S—Recommended for use with the PXI-2575 or SCXI-1175.
•
SH200LFH-BARE WIRE—Recommended for termination other than 50-pin female
D-SUB.
Caution
The LFH200 cable has a maximum voltage rating of 60 VDC. When using
the LFH200 cable with switch modules, do
not
exceed 60 VDC.
Contents
Conventions .............................................................................................................................. 2
Getting Started .......................................................................................................................... 2
Connecting the LFH200 Cable ................................................................................................. 2
Connectors ........................................................................................................................ 4
Cable Configurations ................................................................................................................ 5
SH200LFH-4xDB50F-C Cable ........................................................................................ 5
SH200LFH-4xDB50F-S Cable......................................................................................... 15
SH200LFH-BARE WIRE Cable ...................................................................................... 24
Accessories ............................................................................................................................... 33
Specifications............................................................................................................................ 34
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ
