MS-P522
-GB-R2
GENERAL
• ASinterface connections are suitable for direct control of solenoid valves and spool valves with DIN 46244 (three 6.3 x 0.8 mm spade
terminals) or ISO 4400, plug coils with maximum power ratings of
7,2 W
at 24 V DC (-15 or
-10%
, +10%).
• Solenoid valves and spool valves can be directly integrated into the ASinterface bus.
• Electrical connection by vampire connections designed for standard flat yellow and black ASinterface cables.
• Compact design (comparable to a standard connector).
• Available with or without an additional M12 connector for one or two input/return of information sensors.
COMMUNICATION AND SPECIFICATION
Protocol
:
ASinterface
Transmission medium
: flat black cable: 24V DC power via 2 conductors. On connecting to the power supply
unit,
observe polarity
, blue : - , brown : +
: flat yellow cable : data via 2 conductors
Bus topology
: backbone or tree
Maximum number of connectors
: 31 slaves
Number of outputs per connector
: 1 solenoid valve or spool valve per connector
Maximum length of bus cable
: 100 m (300 m with repeater)
I/O refresh time
: 5 ms max.
Connector addressing (subscribers)
: by ASinterface master via configuration software, or by pocket unit
Compatible PLCs
: SIEMENS, SCHNEIDER, IFM
ASinterface gateways: Profibus - DP, Interbus-S, DeviceNet, Worldfip/FIPIO
ELECTRICAL SPECIFICATION
ASinterface data voltage
: 31,5 V
Power voltage (black cable)
: 24 V DC (
-5%
, +10%)
Maximum ripple
: 10%
Max. connector power
:
7,2 W (0.3A)
Yellow cable connector consumption
: <150 mA
24 V power connection
: vampire connection for ASinterface cable (black cable)
I/O network connection
: vampire connection for ASinterface cable (yellow cable)
Connection of inputs
: M12 5 pin female connectors,
power supply of inputs through black cable
Trigger level of one input
: 0,36 mA
Signaling
: 2 LEDs : 1 for ASinterface and 1 for coil
Ambient temperature
: -10°C to
+60°C
Protection
: IP65, provided connectors and covers are correctly in place (see accessories)
CHOICE OF EQUIPMENT
CONNECTORS
FOR ASinterface CONNECTIONS
at spool valves and solenoid valves
3 x DIN 46244 or ISO 4400 spade terminals
Series
881
NTERFACE
N˚ 21301
Connector type
CODES
ASinterface connector
ASinterface connector
with DIN 46244 plug
(DIN 43650 industrial standard)
ASinterface connector
with ISO 4400 plug
(DIN 43650 Form A)
no input
with M12 input
(Version A)
with M12 input
(Version B)
881 00 277
881 00 337
881 00 408
881 00 278
881 00 339
881 00 409
ACCESSORIES
M12 five male pins connectors for inputs (sensor return):
- with Pg7 90°
elbow mono
input cable for one 4 to 6 mm diameter cable, code:
881 61 927
- with Pg7
straight mono
cable input for one 4 to 6 mm diameter cable,
code:
881 00 330
- with straight
duo
cable input for two 3 to 5 mm diameter cables,
code:
881 00 253
Thermoretractable ends (set of 10 pieces),
code:
881 57 927
for IP65 protection at the end of the connection lines
Ce
rt
if
ié
-
C
ertified
-
Z
e
rt
ifik
at
-
N˚21301
NTERFACE
These connectors are
non
rotatable.
(Version A)
(Version B)
Adaptation
on
coil
on
solenoid valves
CM22
189
CM5
ASCO
CM25-CM30(5W)
190-192
CM6/FT - JMX
ASCO
CMXX/F (1,7W)
*
(
*
) Connector used with low power coil, consumption 1,7 W
NOTE: These connectors are not compatible with POSIFLOW solenoid valves
