DOC00038A000 Rev. 00 02/13/20 MY6381 • Page 8 of 16
Globe & Guard or Lamp Replacement Instructions (Continued)
8.
Insert the handle into the Guard Housing Jig. Screw the Guard & Globe Assembly CLOCKWISE onto the handle using the Wrench
Tool. Use 30 ft. lbs. torque.
FIGURE 10: TURN THE WRENCH TOOL CLOCKWISE TO ATTACH HANDLE
EHLED Portable Handlamp and Replacement Parts
Part No.
Description
EHLED
Portable Handlamp
EHLEDTKG
Guard & Globe Assembly PLUS the Tool Kit (Tool Kit contains a Guard Housing Jig and Wrench Tool.
See Figures 2 and 3.)
EHLEDTK
Tool Kit (Contains a Guard Housing Jig and Wrench Tool. See Figures 2 and 3.)
EHLEDTKb
LED Lamp AND Tool Kit (Tool Kit contains a Guard Housing Jig and Wrench Tool. See Figures 2 and 3.)
Except as expressly provided by Appleton Grp, LLC (Appleton), Appleton products are intended for ultimate purchase by industrial users and for operation by persons trained and experienced in the use and maintenance of this equipment
and not for consumers or consumer use. Appleton warranties DO NOT extend to, and no reseller is authorized to extend Appleton’s warranties to any consumer.
While every precaution has been taken to ensure accuracy and completeness in this manual, Appleton Grp, LLC. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or
omissions. Specifications are subject to change without notice. The Appleton and Emerson logos are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners.
©2020 Appleton Grp, LLC. All rights reserved.
