Emerson Anderson Greenwood 9300 Series, Installation And Maintenance Instructions Manual

Page: 32 / 32

32
Anderson Greenwood SerieS 9300 Pilot oPerated Safety relief ValVeS
InstallatIon and MaIntenance InstructIons
9 Accessories, oPtions And Accessory
rePAir kit
9.1 Accessories
1. field test connection
• In-service verification of set pressure.
• Simplifies the periodic testing of pressure
relief valves.
2. Backflow preventer
• Prevents accidental reverse flow through
pressure relief valve.
10 lubricAnt And seAlAnts for series 9300
(only include lubricants referenced in the manual)
9.2 options
1. Manual unloader
• Permits the pressure relief valve to be opened
at pressures below the nameplate setting.
• Acts as manual override to normal
pressure setting, but has no effect on the
sealed pressure setting.
2. remote unloader
• Permits the pressure relief valve to be
remotely opened to depressurize the
system.
3. Pilot exhaust tubed to main valve outlet
(PeMVo)
• Eliminates any local venting of fluid media
from pilot.
4. remote pressure sense connection
• Pressure relief valve will respond to actual
system pressure conditions.
• Eliminates undesirable cycling due to
excessive inlet pressure losses.
• Improves safety under adverse operating
conditions.
9.3 - Accessory rePAir kit (06.0235.XXX)
Accessory kit type Material dash number
Shuttle check Soft goods Ptfe 140
Shuttle check Bolt SSt 410
diaphragm Soft goods Ptfe 144
diaphragm Bolt SSt 414
Ball check Soft goods NBr 145
Ball check Soft goods fKM 146
Ball check Soft goods ePr 147
Ball check Soft goods Kalrez
®
148
10.1 - lubricAnts used on Pilot PArts
Pilot parts description lubricant
[1]
Pressure adjustment, screw and locknut threads dow corning 33, #05.1500.012
diaphragm and gaskets (91 and 93t pilots) Seal surfaces between
cases and spacer ring Slick stuff, #05.1500.015
Stainless steel case, bolts and nuts threads fluorolube lG 160, #05.1500.023
Carbon steel case bolts threads dow corning 33, #05.1500.012
Stainless to aluminum or aluminum parts threads dow corning 33, #05.1500.012
Sliding seals Ptfe or elastomer dow corning 33, #05.1500.012
Pipe fittings and vents threads Ptfe tape and dow corning 33,
#05.1500.012
1. for oxygen service use Krytoc 240aC
10.2 - lubricAnts And seAlAnts used on MAin VAlVe PArts
Main valve parts description lubricant
[1]
sealant
Carbon steel bolts, screws and nuts, fittings threads dow corning 33,
#05.1500.012 -
Stainless on stainless bolts, screws, nuts and
fittings threads fluorolube lG 160,
#05.1500.023 -
diaphragms and gaskets (91 and 93t) Seal surfaces
between diaphragm
and cases Slick Stuff #4,
#05.1500.015 -
Seat hub and jam nut threads - loctite
Shaft assembly and diaphragm assembly jam nut threads - loctite
Sliding seals Ptfe and elastomers dow corning 33,
#05.1500.012
-
Pipe fittings and vents threads Ptfe tape and
dow corning 33,
#05.1500.012 -
1. for oxygen service use Krytoc 240aC
© 2017 Emerson. All rights reserved.