2
U.L. Model No.: AL200
Table of Contents
Safety Instructions
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK,
OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
a. Use this unit only in a manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
b. Before servicing or cleaning unit, switch power off
at service panel and lock service panel
disconnecting means to prevent power from being
switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a warning device, such as a tag, to the
service panel.
WARNING
!
To reduce the risk of possible fire and electrical shock,
install only on Emerson Models CF901, CF921, CF5100
& CF5200 Ceiling Fans.
This LED Accent Light Fixture is NOT to be used on
Emerson CF Series Ceiling Fans installed in damp or
wet locations.
WARNING
!
Additional Safety Instructions for Installation
1. To avoid possible shock, be sure electricity is turned
off at the fuse box or circuit breaker before wiring.
2. All wiring must be in accordance with the National
Electrical Code “ANSI/NFPA 70-2014” and Local
Electrical Codes. Use the National Electrical Code if
Local Codes do not exist. The ceiling fan must be
grounded as a precaution against possible electrical
shock. Electrical installation should be made or
approved by a licensed electrician.
3. Make certain no bare wires are exposed outside the
wire connectors.
4. Follow the recommended instructions for the proper
method of wiring your new light fixture. If you do not
know enough about electrical wiring knowledge or
experience, have your light fixture installed by a
licensed electrician. Any electrical work not described
in this manual should be performed by a licensed
electrician.
1. Read your Owner’s Manual carefully before installing
the light fixture. Retain Owner’s Manual for future
reference.
2. Be careful of the fan and blades when cleaning,
painting, or working near the fan. Before installing or
servicing the light fixture or ceiling fan, switch power
off at service panel and lock service panel
disconnecting means to prevent power from being
switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a warning device, such as a tag, to the service
panel.
READ AND SAVE THESE INSTRUCTIONS
Section Page
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1. Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2. Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3. Installation on Ceiling Fan CF901 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4. Installation on Ceiling Fan CF921 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
5. Installation on Ceiling Fan CF5100 & CF5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Product Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Troubleshooting
TROUBLE PROBABLE CAUSE SUGGESTED REMEDY
LED Will Not
Loose Electrical Connections. Shut off the Branch Circuit Electricity at the Fuse Box or Breaker Panel
Illuminate.
and check the LED Accent Light Fixture Electrical Connectors for
proper Installation.
