10
PROGRAMMING
Set Current Time and Day
1. Press Menu key to enter installer menu. Then press
Set Time once to indicate hour & AM or PM designation
in clock display.
2. Press and hold either the or touch key until you
reach the correct hour and AM or PM designation.
3. Press Set Time again to display minutes only in clock
display.
4. Press and hold either the or touch keys until you
reach the correct minutes.
5. Press Set Time once again to display year.
6. Press either the or touch key until you reach the
correct year.
7. Press Set Time once again to display month.
8. Press either the or touch key until you reach the
correct month.
9. Press Set Time once again to display date of the month
along with day of the week at top row (which is automatic).
10. Press and hold either the or touch key until you
reach the correct day of the month and day of the week
displayed at the top row.
11. Press Run Schedule once or twice to remove the key.
Now the display will show the correct time and room
temperature.
Automatic Daylight Saving Calculation
The Real Time Clock will adjust automatically for daylight
savings time, in the following manner:
Increment one hour at 2 AM on the second Sunday of March
and decrement one hour at 2 AM on the first Sunday of
November.
The daylight saving feature can be enabled or disabled in
installer configuration menu. Default is
DS ON
(enabled).
After entering installer configuration mode, momentarily
press touch key until the display indicates dS (in actual
temperature digits) and on (default – in clock digits). and
keys will toggle display and operation from on to OFF.
Programming Tip: Copy Program
When programming your thermostat, you may copy the
program from one day to another day or group of days using
the
Copy
key. In 7 day programming mode, a day can be
copied to another day or all six other days. In 5+1+1 day
programming mode the weekday (Mon – Fri) program can be
copied into Sat and Sun or either Sat or Sun.
To copy a program from one day to another:
1. In Set Schedule mode, enter the program for the day or
select the day you wish to copy by pressing
Advance Day
.
2. Press
Copy
. The display will show
“Copy”
next to the
SYSTEM
key and the day of the week that will be copied.
3. Press
Advance Day
. The day being copied will be
indicated and the other days will be flashing.
4. If you wish to copy to all days skip to next step or press
Advance Day
until the day you wish to copy to is flashing.
5. Press
Copy
.
“Copy”
will disappear, the day you copied
from will disappear and the day(s) you copied to will be on.
6. If you wish to copy this same program into other days,
press
Copy
and repeat steps 3, 4 and 5.
7. Press
Run Schedule
to return to normal operation.
Fill in the blank schedule on the next page then:
Enter the Heating Program
1. Press the Menu key and then press Set Schedule. Press
SYSTEM key to select
"Heat"
in the system switch area
indicating the active mode being programmed. You can
switch to the other mode by pressing the system switch at
any time.
2. The top of the display will show the day(s) being
programmed. The time and set at temperature are also
displayed.
"Morning"
will also be displayed to indicate
the period.
3. Press or
key to change the temperature to your
selected temperature for the 1st heating period (Morning).
4. Press or key to adjust the start time for period.
The time will change in 15 minute increments.
5. Press
FAN
to select
Auto
or
Prog
.
6. After you have set the time and the temperature for the
period to begin, press Set Schedule to advance to the
next program period.
7. Repeat steps 2 through 6 until all of the program times
and temperatures are set for all program periods on
that day.
8. Press "Advance Day" to change to the next day and
repeat steps 2 through 8.
9. When programming is complete and all of the times and
temperatures match your desired heating schedule,
press Run Schedule. The thermostat will now run your
program.
Enter the Cooling Program
1. Press the SYSTEM key until the
"Cool"
icon appears.
2. Follow
Enter Heating Program
instructions for entering
cooling times and temperatures.
Automatic Schedule
Auto Schedule Heat is a fast way to program all the heating
temperatures during the day to a comfortable temperature
and then lower the temperature 6° at night. Auto Schedule
Cool will program all of the cooling time periods to the same
temperature.
Note: Auto Schedule
is available only when the thermostat
is first powered on, after the thermostat has been reset, or
anytime you turn
AS
on in the Configuration Menu (item 17
AS Heat
or 18
AS Cool
).
Heating Example:
1. In Heat mode, press
Auto Schedule
once.
2. Press or
to select a comfortable day time
temperature (example 72°).
3. Press
Auto Schedule
again. Your thermostat is now
programmed for 72° from 6:30 AM until 10:30 PM at 72°.
At 10:30 PM, your thermostat will set back 6° to 66°.
Your heating program for each day of the week will look like
this:
6:30
72°
8:00
72°
5:00
72°
10:30
66°
