background image

Description

Gas or Oil Heat

Yes

Electric Furnace

Yes

Heat Pump (No Aux. or Emergency Heat)

Yes

Heat Pump (with Aux. or Emergency Heat)

No

Systems with up to 3 Stages Heat, 2 Stages Cool

No

Heat Only Systems

Yes

Millivolt Heat Only Systems – Floor or Wall Furnaces

Yes

Cool Only Systems

Yes

Hydronic (Hot Water) Zone Heat – 2 Wires

Yes

Hydronic (Hot Water) Zone Heat – 3 Wires

Yes

www.white-rodgers.com

Blue Selecto Thermostat with 

Automatic Heat/Cool Changeover Option

PART NO. 37-6952B

Replaces 37-6952A

0905

Single Stage or Heat Pump

Installation and Operating Instructions for Model:

APPLICATIONS 

THERMOSTAT APPLICATION GUIDE

1F80ST-0471 Thermostat

with Spanish Display

SPECIFICATIONS 

Electrical Rating:
 

Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . .    mV to 30 VAC, NEC Class II, 50/60 Hz or DC

 

Input-Hardwire  . . . . . . . . . . . . . . . . . . . . . . . . .    20 to 30 VAC

Terminal Load  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    1.0 A per terminal, 1.5A maximum all terminals combined
Setpoint Range  . . . . . . . . . . . . . . . . . . . . . . . . . . . .    45° to 90°F (7° to 32°C)
Differential (Single Stage)  . . . . . . . . . . . . . . . . . . . .    Heat 0.6°F; Cool 1.2°F (adjustable)
Differential (Heat Pump)  . . . . . . . . . . . . . . . . . . . . .    Heat 1.2°F; Cool 1.2°F (adjustable)
Operating Ambient. . . . . . . . . . . . . . . . . . . . . . . . . .    32° to +105°F (0° to +41°C)
Operating Humidity  . . . . . . . . . . . . . . . . . . . . . . . . .    90% non-condensing max.
Shipping Temperature Range  . . . . . . . . . . . . . . . . .    -40° to +150°F (-40° to +65°C)
Dimensions Thermostat. . . . . . . . . . . . . . . . . . . . . .    3.4"H x 4.4"W x 1.3"D

CAUTION

!

To  prevent  electrical  shock  and/or  equipment  damage, 
disconnect electric power to system at main fuse or circuit 
breaker box until installation is complete.

ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this 
product may replace a product that contains mercury.

Mercury and products containing mercury must not be 
discarded in household trash. Do not touch any spilled 
mercury. Wearing non-absorbent gloves, clean up any 
spilled mercury and place in a sealed container. For proper 
disposal of a product containing mercury or a sealed 
container of spilled mercury, place it in a suitable shipping 
container. Refer to www.white-rodgers.com for location to 
send product containing mercury.

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS 
CAREFULLY BEFORE INSTALLING OR OPERATING THIS 
CONTROL COULD CAUSE PERSONAL INJURY AND/OR 
PROPERTY DAMAGE.

Model

Programming Choices

1F80ST-0471

5/2 Day

5/1/1 Day

Non-Programmable

1F86ST-0471

Non-Programmable

Save these instructions for future use!

Index

Page

Installation

2

Wiring Connections

3

Thermostat Quick Reference

3

Installer Confi guration Menu

4

Operating Your Thermostat 

6

Programming

6

Troubleshooting 

8

Summary of Contents for 1F86ST-0471









Reviews: