May 2018
16
Quick Start Guide
Shield grounding
The shield of the twisted pair cable needs to be grounded using the grounding
terminal on the Emerson 1410D, and it should be taped back on the Emerson
781 side.
Emerson 1410D Grounding
The Emerson 1410D DIN rail cabinet must be grounded as well. A #6 AWG
(4.11 mm European) copper wire bonding connector with the shortest length
possible, no sharp bends, and no coiling is recommended.
Figure 12. Emerson 1410D Grounding
A. #6 AWG copper wire
B. Protective ground
C. Reference ground (when present)
D. Earth
(May be polymer with
grounding plate)
2
1
A
A
B
D
00825-0200-4410_RevEA.fm Page 16 Thursday, May 10, 2018 1:26 PM
