Quick Start Guide
3
May 2018
1.0
Wireless planning
1.1
Power up sequence
The Gateway should be installed and functioning properly before power
modules are installed in any wireless field devices. Wireless field devices should
also be powered up in order of proximity from the Gateway beginning with the
closest. This will result in a simpler and faster network installation.
1.2
Antenna position
The antenna should be positioned vertically and be approximately 6 ft. (2 m)
from large structures or buildings to allow for clear communication to other
devices.
1.3
Mounting height
For optimal wireless coverage, the remote antenna is ideally mounted 15–25 ft.
(4.6–7.6 m) above ground or 6 ft. (2 m) above obstructions or major
infrastructure.
2.0
PC requirements
2.1
Operating system (optional software only)
Microsoft
®
Windows
™
Server 2008 (Standard Edition), Service Pack 2
Windows Server 2008 R2 Standard Edition, Service Pack 1
Windows 7 Professional, Service Pack 1
Windows 7 Enterprise, Service Pack 1
Windows 8 Enterprise, Service Pack 1
Windows 10 Enterprise, Service Pack 1
2.2
Applications
Configuration of the Gateway is done through a secure web interface. Recent
versions of the following browsers are supported:
Internet Explorer
®
Chrome
™
browser
Mozilla Firefox
®
Microsoft Edge
2.3
Hard disk space
AMS Wireless Configurator: 1.5 GB
Gateway Setup CD: 250 MB
3.0
Initial connection and configuration
To configure the Gateway, a local connection between a PC/Mac/laptop and the
Gateway needs to be established. The Emerson 1410 and 1410D are
operationally equivalent and the following instructions are applicable to both
models.
00825-0200-4410_RevEA.fm Page 3 Thursday, May 10, 2018 1:26 PM
