- 4 -
SEW-121816 EN
PARTS IDENTIFICATION
1.
Take-up lever
2.
Thread tension dial
3.
Stitch density dial
4.
Thread cutter
5.
Light
6.
Needle clamp screw
7.
Bottom bobbin
8.
Drawer
9.
Hand wheel
10.
Reverse button
11.
Power switch
12.
Bobbin winder pin
13.
Bobbin winder stop
14.
Foot pedal input
15.
Bobbin winder tension disk
16.
Presser foot lifter
17.
Presser foot
18.
DC input
19.
Spindle
20.
Stitch selection button (“+”/“-”)
21.
Digital display of stitch selected
22.
Stitch panel
Note – The hand wheel should always be
turned counterclockwise as the arrow
directed on the wheel.
Accessories:
a)
Foot pedal with speed control
b)
Thread spool (X 2)
c)
Bobbin (X 2)
d)
Needle threader
e)
Needle
f)
Presser foot for buttonhole sewing
g)
Presser foot for button sewing
h)
Adapter
HOW TO START THE MACHINE
1.
Before use, make sure the power switch is placed at the position “OFF”.
2.
Connect the foot pedal by inserting the jack into the foot pedal input socket.
3.
Connect the adapter’s jack to the DC input socket on
the back of the machine, and connect the plug to the
main power supply.
4.
Turn the power switch to the position “ON”, and then
step on the foot pedal, the machine starts working.
You can adjust the machine’s running speed by the
foot pedal. The more force you step on with, the faster
the machine sews. When the foot pedal is pressed
down to the bottom, the machine gets the fastest
speed.
Summary of Contents for SEW-121816
Page 1: ......