User manual MPPT Solar charge controller PowerXtreme XS20
E18-XS20-EN00
www.emergoplus.com
Page 26 of 44
Step 1: Select the installation location
Do not place the charger in a location where it is exposed to direct
sunlight, high temperatures or water penetration. Ensure a well-ventilated
mounting location.
Step 2: Place the drilling template in the correct position and mark the
attachment points with a pen. Drill 4 mounting holes on the 4 marked
points and place the screws.
Step 3: Mount the charger
Hang the charger on the positioned screws.
Image 7. Montage with screq
Step 4: Cabling
Remove the two screws on the charger and then start to lay out the wiring.
In order to ensure your own safety during this process, we recommend
the following work sequence.
