29
24. “Water Meter”
Enter into “Water Meter” menu to setup Flow Meter configuration type, see total amount of liters passed through
water meter, reset totalizer and setup a timeout alarm for no water flow. The alarm will be notified into main screen
and water meter status (see page 6).
FM Input can be set to operate Water Meter as 0-20mA or 4-20mA input, P/L (pulses per liter) or L/P (liters per pulse).
Tot WMI:
water passed through water meter
FM Input:
Water Meter Working Mode
RST TOT: reset totalizer
Timeout:
countdown to “no water flow alarm”
1 2
Connect as follows if mA working mode is enabled:
Block 1 : red wire (+)
Block 2 : black wire (-)
