8
7. “Main Menu” list
To grant access into “Main Menu” enter the passcode (as described in previous chapter). Once into “Main Menu”
rotate the wheel to scroll through all the options available.
“Setpoint” (see page 9)
“Calibration” (see page 14)
“Parameters” (see page 16)
“Output manager” (see page 17)
“Instrument reset” (see page 18)
“Dosing alarm” (see page 19)
“International” (see page 20)
“Probe Failure” (see page 21)
“Compensation” (see page 32)
“Flow” (see page 22)
“Service” (see page 22)
“Out of Range Alarm” (see page 24)
“mA Outputs” (see page 23)
Communication (see below)
“Log Setup” (see page 38)
“Log View” (see page 38)
“Self Clean” (see page 25)
“Circulator Pump” (see page 26)
“Water Meter” (see page 29)
“Feed Forward ” (see page 30)
“RS485 Setup” (see page 36)
“SMS menu” (see page 36)
“TCP IP” (see page 37)
“GPRS” (see page 38)
“Email” (see page 38)
“Modbus” -
(see page 39)
