EMC2 EMC VNX5400, Hardware Information Manual

Page: 95 / 138

Disk-array enclosures
EMC VNX5400 Hardware Information Guide 95
LCC status LEDs
The following table describes the LCC status LEDS.
Figure 73 Example of a 3U, 120 (2.5-inch) DAE LCC A (rear view)
Table 44 LCC status LEDs
LED Color State Description
Power (bottom) Green On Power on
— Off Power off
Power fault
(top)
Amber On Fault
— Off No fault or power off
1 LCC mini-SAS connector LEDs
(blue/green); for a closer view, see
Figure 74 on page 96 .
6 LCC management (RJ-12) connector (not
used in the VNX5400 platform); for a
closer view, see Figure 76 on page 98 .
2 LCC enclosure ID 7 LCC mini-SAS connector (input or primary);
labeled with a double circle (dot) symbol
.
The right port is labeled 0 and the left
port is labeled 1.
3 LCC enclosure bus ID 8 LCC power fault LED (amber); Table 44 on
page 95
4 LCC lock knob (orange) 9 LCC power on LED (green); Table 44 on
page 95
5 LCC USB connector (for a closer view, see
Figure 77 on page 98 )
10 LCC mini-SAS connector (output or
expansion); labeled with a double
diamond symbol
.
The right port is
labeled 0 and the left port is labeled 1.
1 0 1 0
X4 X4
1 0
6 Gb
SAS
#
X4 X4
6 Gb
SAS
1 0
7
9
8 10
2 4 3 5 6 1