VNX5400 product description
EMC VNX5400 Hardware Information Guide
11
– One power supply module (hot-swappable) featuring (see
power supply module” on page 31
for more information):
Note: Three types of power supplies are supported in the VNX5400 storage
system. Two AC type power supplies and one DC type power supply. For more
information on the power supply types, see
“Storage processor power supply
and the
VNX5400 Parts Location Guide
for more
information.
a.) One recessed power plug
b.) Three LEDs (labeled with ! for fault, DC and AC); the labels on the LEDs are
printed upside down.
Note: The power supply is secured with a pull latch and handle.
– Four PCI Gen 3, 8x lane I/O module slots (A1 – A4 and B1 – B4) are available for
use, supporting:
Note: The maximum number of I/O modules for the VNX5400 is 4 per SP. Any
combination of the following I/O modules up to four per SP.
a.) Four-port 8-Gb/s FC optical (running at 2, 4, or 8 Gb/s); labeled 8 GbE Fibre
on the latch handle
Four-port 16-Gb/s FC optical (running at 4, 8, or 16 Gb/s); labeled
16 GbE Fibre v1 on the latch handle
b.) Four-port 1-Gb/s Base-T iSCSI I/O module; labeled 1 GbE iSCSI/TOE on the
latch handle
c.) Two-port 10-Gb/s optical or active Twinax5; labeled 10 GbE v3 on the latch
handle
d.) Two-port 10-Gb/s RJ45 Base-T iSCSI/IP; labeled 10 GbE Base-T on the latch
handle
Note: This I/O module is not supported when the VNX5400 storage system is
using the low powered (
800 W, 100-240 V
) power supply (see
power supply module” on page 31
and the
VNX5400 Parts Location Guide
for
more information).
e.) Two-port 10-Gb/s Fibre Channel over Ethernet (FCoE); labeled 10 GbE/FCoE
on the latch handle
◆
One to two 2U DMEs:
• On the front, the DME has one to two Data Movers (DMs). Each DM consists of:
– One CPU module (see
for more information)
– Two power supply/cooling modules
• On the rear, the DME has one to two Data Movers. Each DM consists of:
– One management module (see
“Data Mover management module”
for more information) featuring:
a.) One RS-232/EIA 232 serial (up to 115 K baud) service laptop (micro DB-9)
port