System component description
EMC VNX5400 Hardware Information Guide
33
Figure 16 SP management module
Storage processor management module Ethernet (RJ-45) ports
The VNX5400 platform storage processor (SP) management module comes with two
integrated dual-port Ethernet ports (labeled with a symbol depicting a wrench and the
other depicting network management) on the rear of the management module. The SP
management port provides an interface for connecting a 10-, 100-, or 1000-Mb/s cable to
the LAN providing full-duplex (FDX) capability, which enables simultaneous transmission
and reception of data.
To access the SP management port, connect a Category 3, 4, 5, 5E, or 6 unshielded
twisted-pair (UTP) cable to this RJ-45 modular jack connector on the back of the SP
management module, as described in
.
Since the 1U Control Station and the management module have the same type of
management (RJ-45) ports,
“Control Station Ethernet (RJ-45) ports” on page 37
detailed information about the SP management module ports, connector, and adapter.
1
Power/fault LED
5
DB-9 serial console socket connector
(SPS); not used in the VNX5400 platform
2
SP management module push button latch
handle
6
USB port; not used
3
RJ-45 Ethernet port (management)
7
RJ-45 Ethernet port (service laptop)
4
DB-9 serial console socket connector
(service laptop)
1
2
3
5
7
4
VNX-000583
6
