398
Celerra Network Server Command Reference Manual
The server Commands
<fs_name> <mount_point>
Mounts a file system to the specified <mount_point>. When a file
system is initially mounted, the <mount_point> is required; however,
remounting a file system after a temporary unmount, does not
require the use of a <mount_point>.
[-option <options>]
Specifies the following comma-separated option(s):
[ro | rw]
Specifies the mount as read-write (default), or read-only which is
the default for checkpoints and TimeFinder/FS.
Note:
MPFS clients do not acknowledge file systems that are mounted
read-only and allow their clients to write to the file system.
[accesspolicy={NT | UNIX | SECURE | NATIVE | MIXED |
MIXED_COMPAT
}]
Indicates the access control policy as defined in the table below:
Note:
When accessed from a Windows client, ACLs are only checked if
the CIFS user authentication method is set to the recommended default,
NT. This is set using the -add security option in the server_cifs
comman
d.
Access Policy
CIFS clients:
NFS clients:
NATIVE (default)
ACL is checked.
UNIX rights are checked.
UNIX
ACL and UNIX rights are checked.
UNIX rights are checked.
NT
ACL is checked.
ACL and UNIX rights are checked.
Summary of Contents for Celerra
Page 6: ...Celerra Network Server Command Reference Manual 6 Contents...
Page 10: ...10 Celerra Network Server Command Reference Manual Preface...
Page 16: ...16 Celerra Network Server Command Reference Manual Overview...
Page 276: ...276 Celerra Network Server Command Reference Manual The nas Commands...
