EMC Celerra, Command Reference Manual

Page: 165 / 522

nas_event
165
The nas Commands
UPSMonitor 23 The UPS has returned from bypass mode
UPSMonitor 24 The base module bypass power supply needs repair
UPSMonitor 25 The base module fan needs repair
UPSMonitor 26 Communication lost with external battery packs, check
battery signal cable
UPSMonitor 27 Communication established with external battery packs
UPSMonitor 28 A battery run time calibration test has been initiated
UPSMonitor 29 Agent restarting as commanded by manager
UPSMonitor 30 A UPS is turned on
UPSMonitor 31 The UPS has enabled SmartTrim(TM) voltage reduction
UPSMonitor 32 Authentication on agent code image is done
UPSMonitor 33 The overload condition has been cleared.
UPSMonitor 34 The UPS has returned from SmartBoost(TM)
UPSMonitor 35 The UPS has returned from SmartTrim(TM) voltage reduction
UPSMonitor 36 The UPS has returned from a bad battery fault
UPSMonitor 37 The UPS has finished calibrating
UPSMonitor 38 The UPS discharge condition has been cleared
UPSMonitor 39 A graceful shutdown has been initiated
UPSMonitor 41 Outlet has been turned on
UPSMonitor 42 Outlet has turned off
UPSMonitor 43 Outlet has rebooted
UPSMonitor 44 The SNMP configuration has been changed
UPSMonitor 45 Outlet configuration has been changed
UPSMonitor 46 Three unsuccessful logins have been attempted via the console
UPSMonitor 47 An unsuccessful attempt to login via HTTP
UPSMonitor 48 Someone has changed the password on the device
UPSMonitor 49 The output voltage is not within acceptable range
UPSMonitor 50 The output voltage has returned to an acceptable level
UPSMonitor 51 The battery charger has failed
UPSMonitor 52 The battery charger failure condition has been cleared
UPSMonitor 53 The battery temperature threshold has been violated
UPSMonitor 54 The battery over temperature has been cleared
UPSMonitor 55 SmartBoost(TM) or SmartTrim(TM) relay fault
UPSMonitor 56 SmartBoost(TM) or SmartTrim(TM) relay fault has been cleared
UPSMonitor 57 A humidity threshold has been violated on probe 1
UPSMonitor 58 A humidity threshold violation has been cleared on probe 1
UPSMonitor 59 A temperature threshold has been violated on probe 1
UPSMonitor 60 A temperature threshold violation has been cleared on probe 1
UPSMonitor 61 A humidity threshold has been violated on probe 2
UPSMonitor 62 A humidity threshold violation has been cleared on probe 2
UPSMonitor 63 A temperature threshold has been violated on probe 2
UPSMonitor 64 A temperature threshold violation has been cleared on probe 2
UPSMonitor 65 Communication established between the agent and the
Environmental Monitor
UPSMonitor 66 Communication lost between the agent and the Environmental
Monitor
UPSMonitor 67 The number of batteries has increased
UPSMonitor 68 The number of batteries has decreased
UPSMonitor 69 The number of power modules has increased
UPSMonitor 70 The number of power modules has decreased
UPSMonitor 71 An intelligence module has been inserted
UPSMonitor 72 An intelligence module has been removed