![EMBRON Hatteland Technology Series 1 User Manual Download Page 52](http://html1.mh-extra.com/html/embron/hatteland-technology-series-1/hatteland-technology-series-1_user-manual_2399667052.webp)
52
IND100241-9
Appendix
Pin Assignments - Common Connectors
Note:
Not all connectors may be available on your specific product. This depends on the amount of additional hardware installed from factory,
or customized solutions. These pin assignments are for the common connectors used.
Connectors are seen from users Point Of View (POV).
18/24/24+5 pin DVI-D, DVI-I, Single Link, Dual Link Combined Female
1 2 3 4 5 6 7 8 C1 C2
9 10 11 12 13 14 15 16 C5
17 18 19 20 21 22 23 24 C3 C4
PIN 01 T.M.D.S. Data2 - (Digital - RED link 1)
PIN 02 T.M.D.S. Data2 + (D RED link 1)
PIN 03 T.M.D.S. Data2/4 Shield
PIN 04 T.M.D.S. Data4 - (Digital - GREEN link 2)
PIN 05 T.M.D.S. Data4 + (D GREEN link 2)
PIN 06 DDC Clock
PIN 07 DDC Data
PIN 08 Analog Vertical Sync (DVI-I only)
PIN 09 T.M.D.S. Data1 - (Digital - GREEN link 1)
PIN 10 T.M.D.S. Data1 + (D GREEN link 1)
PIN 11 T.M.D.S. Data1/3 Shield
PIN 12 T.M.D.S. Data3 - (Digital - BLUE link 2)
PIN 13 T.M.D.S. Data3 + (D BLUE link 2)
PIN 14 +5V Power (for standby mode)
PIN 15 Ground (for +5V and analog sync)
PIN 16 Hot Plug Detect
PIN 17 T.M.D.S. Data0 - (Digital - BLUE link 1) and digital sync.
PIN 18 T.M.D.S. Data0 + (D BLUE link 1) and digital sync.
PIN 19 T.M.D.S. Data0/5 Shield
PIN 20 T.M.D.S. Data5 - (Digital - RED link 2)
PIN 21 T.M.D.S. Data5 + (Digital - RED link 2)
PIN 22 T.M.D.S. Clock Shield
PIN 23 T.M.D.S. Clock + (Digital clock + (Links 1 and 2)
PIN 24 T.M.D.S. Clock - (Digital clock - (Links 1 and 2)
PIN C1 Analog RED
PIN C2 Analog GREEN
PIN C3 Analog BLUE
PIN C4 Analog Horizontal Sync.
PIN C5 Analog Ground (return for RGB signals)
DDC = Display Data Channel.
T.M.D.S = Transition Minimized Diff erential Signal
PIN C1,C2,C3,C4 = Only present on DVI-I connectors.
NOTE: Connector shows a DUAL LINK design, but some units may not support it.
Only units with 1920x1200 or more in resolution require / support DUAL LINK.
Analog RGB/VGA, 15-pin DSUB High Density Female
Onboard or via DVI-4 adapter
5 4 3 2 1
15 14 13 12 11
10 9 8 7 6
PIN 01 RED
Red, analog
PIN 02 GREEN
Green, analog
PIN 03 BLUE
Blue, analog
PIN 04 ID2/RES
Reserved for monitor ID bit 2 (grounded)
PIN 05 GND
Digital ground
PIN 06 RED_RTN
Analog ground red
PIN 07 GREEN_RTN Analog ground green
PIN 08 BLUE_RTN
Analog ground blue
PIN 09 KEY/PWR
+5V power supply for DDC (optional)
PIN 10 GND
Digital ground
PIN 11 ID0/RES
Reserved for monitor ID bit 0 (grounded)
PIN 12 ID1/SDA
DDC serial data
PIN 13 HSYNC.
Horizontal sync or composite sync, input
PIN 14 VSYNC.
Vertical sync, input
PIN 15 ID3/SCL
DDC serial clock
4-pin USB TYPE B
Pin 2: Negative Data
Pin 3: Positive Data
Pin 4: Ground
Pin 1: VCC +5V
Summary of Contents for Hatteland Technology Series 1
