EMBRON Hatteland Technology Series 1, User Manual

Page: 17 / 62

17
General Installation Recommendations
Installation
IND100078-26
Rotary Bracket and Mounting Bracket - assembling/finalization
Illustration shows Mounting Bracket “JH MMDBR STD-A1” / “JH 23TBR T01” and “Rotary Bracket JH MMDRO STD-A1” combined and not
combined. The brackets are available separately and may be delivered in parts. Some disassembly/assembly is required. Use the provided screws/
bolts/nuts included in the package. A stand-alone “Rotary Bracket” can not be mounted to a Display or Panel Computer unit without the “Mounting
Bracket” as base first. For alternative drawings / measurements of the brackets, review sales drawing (available on internet or inside user manual).
The procedure applies for Display and Panel Computers of sizes: 17, 18, 19, 20 and 23 inch.
You must provide your own bolts to secure the completed unit ( #A ) to the mounting location. Recommended size to mount complete unit is:
M10 and minimum 30mm in length. If no Rotary Bracket is present or needed, the completed unit ( #B ) should be mounted at location with M6
>20mm in length depending on material of table/desktop etc.
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal
Example #A : Mounting B Rotary Bracket
Example #B : Mounting Bracket only
Tip:
If you need to combine Mounting Bracket “JH MMDBR STD-A1” / “JH 23TBR T01” with Rotary Bracket
“JH MMDRO STD-A1” onto Display or Panel Computer unit, please follow Step 1 to 8.
If you need to mount only Mounting Bracket “JH MMDBR STD-A1” to unit, please follow Step 3-4 and Step 5
(re-attach 4 x screws after adjustment based on product size).
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal
JH MMDBR STD-A1
JH 23TBR T01
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal