EMBRON HATTELAND TECHNOLOGY HD 43T22 MVD-MA C Series, User Manual

Page: 68 / 96

68
Operation Advanced (DDC/CI) Control Overview
IND100064-52
Description Syntax and Functionality Details and Values Via SCOM
Touch Power Mode
(0xE6)
Write/Set Power Mode:
[S] <6E:w> 51 84 03 E6 00 xx A1 [P]
Reply of successfull request:
[S] <6F:r> 5C 80 BE *[P]
Read Power Mode:
[S] <6E:w> 51 82 01 E6 5A [P]
Reply of successfull request :
[S] <6F:r> 6E 88 02 00 E6 01 00 FF 00 FF 53 *[P]
E6 = Command ID
Where xx is:
0x FF = Always Active
0x FE = Only active when display is
on and has an active input
signal
0x 00 = Only active if selected source
is active AND Selected
Source="DVI-I_1"*
0x 01 = Only active if selected source
is active AND Selected
Source="DVI-I_2"*
0x 02 = Only active if selected source
is active AND Selected
Source="DVI3"*
0x 03 = Only active if selected source
is active AND Selected
Source="DVI4"*
0x 10 = Only active if selected source
is active AND Selected
Source="RGB_1"*
0x 11 = Only active if selected source
is active AND Selected
Source="RGB_2"*
0x 12 = Only active if selected source
is active AND Selected
Source="RGB_3"*
0x 13 = Only active if selected source
is active AND Selected
Source="RGB_4"*
0x 20 = Only active if selected source
is active AND Selected
Source="CVIDEO1"
0x 21 = Only active if selected source
is active AND Selected
Source="CVIDEO2"
0x 22 = Only active if selected source
is active AND Selected
Source="CVIDEO3"
0x 23 = Only active if selected source
is active AND Selected
Source="CVIDEO4"
0x 30 = Only active if selected source
is active AND Selected
Source="DP1"
0x 31 = Only active if selected source
is active AND Selected
Source="DP2"
0x 32 = Only active if selected source
is active AND Selected
Source="DP3"
0x 33 = Only active if selected source
is active AND Selected
Source="DP4"
0x 3F = Read Command
Read/Write support.
MCC:
(Touch Power
Mode)
Actual Temperature
(0xF0)
Read Temperature:
[S] <6E:w> 51 82 01 F0 4C [P]
Reply of successfull request:
[S] <6F:r> 6E 88 02 00 F0 01 ww xx yy zz 63 *[P]
F0 = Command ID
Read support.
Reply 4 bytes ( ww, xx, yy, zz )
indicating degree in Celcius.
Example: 0038
TMP
Unit Run Time
(0xF3)
Read Elapsed Hours:
[S] <6E:w> 51 82 01 F3 4F [P]
Reply of successfull request:
[S] <6F:r> 6E 88 02 00 F3 01 ww xx yy zz 63 *[P]
F3 = Command ID
Read support.
Reply in ASCII 4 bytes
( ww, xx, yy, zz ) indicating hours.
Example: 1038
ETC