EMBRON HATTELAND TECHNOLOGY HD 43T22 MVD-MA C Series, User Manual

Page: 37 / 96

37 User Controls
OSD Menu Overview
IND100064-65
OSD Keycode / OSD Lock Mode
During use, a small requester may pop-up on screen asking you for a “Key Code”. This is a safety feature (due to
ECDIS Compliance) that might be predefined in your setup. To quickly understand how to enter a code, navigate and
finally access the underlying main menu, simply follow the illustration below. The “Key Code” is by factory default
“321” . If the “Key Code” requester do not appear on screen, you can skip reading this section for now and proceed to
the next page.
0 0 0
Advanced
Active Display Area + Requester
0 0 0
Advanced
Close-up of Requester
3 2 0
Advanced
Close-up of Requester
1: Typical position of requester on screen.
2: Enter first number (from 0 to 9).
Use “Navigation/Hot Keys” touch buttons to
increase/decrease. Number change in real time.
3: Now touch menu button to store first
number and proceed to second number.
Current number will appear in red color
3 2 1
Advanced
Close-up of Requester
Active Display Area + OSD Menu
4: Repeat step 2 and 3, until
“Key Code” reads “3 2 1” and finally touch
menu button to continue.
5: The OSD menu appear
After the code is successfully entered you will gain access to the OSD Menu and a multitude of functions will be
available for adjusting or reviewing. Please proceed to the next page, where you will learn the differences between
“Basic” and “Advanced” menu modes and a complete map of all the underlying functions available within.