Embrace™ Nest Operation Manual (0602-50001-002)
Page 27
5.3 USING THE EMBRACE™ NEST
Prepare the unit as described above.
Setting up the AccuTemp™ Heater
1.
Place the AccuTemp™ Heater on a flat surface.
2.
Plug in the AccuTemp™ Heater to the main power supply (wall socket) and ensure that the
“POWER ON” indicator is illuminated (blue).
3.
Ensure that there are no error indicators as indicated in 4.4 ERROR INDICATORS FOR THE
ACCUTEMP™ HEATER
4.
To open the lid push the sliding latch sideways and lift the lid.
5.
Place the WarmPak™ into the AccuTemp™ Heater WarmPak™ Tray with the PCM layer touching
the heating surface. To assist proper positioning of the WarmPak™ note the two indicators:
•
The Embrace Innovations logo should be upright, and the word “Embrace” should be
readable.
•
The notch on the top right corner of the WarmPak™ aligns with the notch on the
WarmPak™ cavity tray on the AccuTemp™ Heater, very much like a cell phone SIM-card.
6.
Close the lid. Ensure that the latch clicks back to position. If the WarmPak™ is slightly crumpled
after use, you may have to use both hands to push down on the lid when closing the
AccuTemp™ Heater.
Starting the heating cycle
7.
Press the Start/Stop button on the AccuTemp™ Heater to begin the heating process. The
“HEATING CYCLE ON” indicator glows (amber) to indicate that the heating cycle is in progress.