Embrace™ Nest Operation Manual (0602-50001-002)
Page 10
CHAPTER 3: PRODUCT DESCRIPTION
The Embrace™ Nest starter pack consists of the components listed below. Check the contents upon
unpacking and verify that all components are available. Check for any damage that may have
occurred during shipping.
Product
Quantity
AccuTemp™ Heater
1
WarmPak™
1
BabyWrap™ + cushion
1 + 1
Instructional Poster
1
Operation Manual
1
WarmPak Bag
1
The following section provides an overview of the Embrace™ Nest with a brief functional description
of each of the above components.
3.1 PRODUCT OVERVIEW
As stated earlier, the Embrace™ Nest consists of three components: AccuTemp™ Heater, WarmPak™
and BabyWrap™.
The AccuTemp™ Heater is used to heat the WarmPak™ to operating temperature (defined below).
This heated WarmPak™ serves as the source of warmth in the Embrace™ Nest.
The BabyWrap™ serves as an interface to ensure good thermal contact between the newborn and
the WarmPak™, and to offer additional insulation to the ventral surface of the newborn.
The heated WarmPak™ is inserted into the WarmPak™ compartment of the BabyWrap™. The
newborn is secured in the newborn compartment of the BabyWrap™. The device (heated
WarmPak™ + BabyWrap™) thus prepared may now be used to provide thermoregulatory support to
the newborn.
For in-clinic usage, it is recommended to use two WarmPaks™ in tandem, one after the other (one
being warmed in the AccuTemp™ Heater, while the other is being used on the newborn). This way
the newborn can be provided with a continuous supply of heat.