5
•
Display of the current temperature
of the heatable upper roller
•
START/STOP
- Starts or stops the rollers. Alternatively you can step on the pedal and thus start or stop.
•
SPEED
„
-
“ and „
+
“ changes the laminating speed
•
REVERSE
- The machine stops and runs slowly in the opposite direction
•
Information on remaining running
meters of laminate on axle R4
The keyboard with LED display
The machine is controlled by the foot pedal and the following keyboard:
•
Information on set laminating
speed, between 0 and 9.9 m/min
•
„Close Warm“
and
„Close Cold“
keys for preset, fully automatic
adjustment of the roller pressure.
•
Switch for switching the heating
on and off. If „
HEATING ON
“ is
pressed several times, 40/45/50
and 55°C can be selected
•
Display of the currently set gap
height of the rollers in cm
•
Keypad for entering the laminate
run length during reel change
•
Keypad for manual opening and
closing of the rollers.
„OPEN“
to trigger a max. opening to
30mm
•
„
Close Warm
“ is used to close the rollers when the upper roller is heated.
•
„
Close Cold
“ is used to close the rollers when the roller is cold and not heated.
•
Display of the set target
temperature of the heatable
upper roller
