2
Further notes on installation:
Power supply
The power supply specified here should be available in the vicinity of the site:
• alternating voltage: 110 or 230V. The power supply unit switches automatically.
• frequency: 50 - 60 Hz
• current strength: 16 A
Power connection
Check that the power connection corresponds to the machine power.
Before each connection to the mains, the earthing must be secured.
Connect the machine to the mains:
• Disconnect the power supply.
• Connect the connection cable to a suitable plug or directly
to the power distribution.
• Switch the power back on.
Space requirement
The footprint must meet the space requirements for the scheduled use of the machine.
Also take into account the space required for feeding or dispensing the material and the dimensions
of the images and plates to be processed.
Floor space
Prepare a level floor according to the dimensions of the machine, taking into account the accessory equipment.
Lighting
Good lighting (indicative 300 - 600 lux) is essential for safe machine operation and maintenance.
Room characteristics
The machine must be installed in a closed room and protected from the weather.
Permissible room temperature: 18°C to 35°C.
Corresponding permissible humidity range: 30% to 80%.
Foot pedal
Connect the foot pedal by plugging the plug into the socket marked on the bottom right.
