14
Lamination of prints on plate
There are various techniques that professional users practice:
• Laminating a print onto a self-adhesive plate
• Lamination of a self-adhesive print on plate
The general rule is:
• Open the lamination rollers at the height you need for the panel.
• Adjust the feed plate to the height of the panel.
• Slide the plate between the laminating rollers and close the rollers with the „
CLOSE
“ button.
• Remove the plate with the „
REVERSE
“ function.
• Now the passage height is set.
Laminating a print onto a self-adhesive plate
• Remove the backing paper from the plate
by hand during the lamination process.
• Start the laminating process by sliding the plate between
the laminating rollers and pressing the
START
button.
• Slide the plate between the lamination rollers
and place the print over the roller
• Pull off 3 - 4 cm from the cover paper of the plate
and fix the print on the plate by hand.
