- 60 -
Copyright © 2011 by element14
User Manual
For more information on WinCE driver development please refer to below location for more
documents for Windows Embedded CE 6.0:
Start->
All programs->
Microsoft visual Studio 2005->
MicroSoft Visual Studio Document->
Content(C)->
Windows Embedded CE 6.0->
Develop a Device Driver.
Figure 4-1
4.5 How to Update System Image
The SBC8018 evaluation board supports
“NK.bin” or “NK.nb0” boot from TF Card and NAND flash,
this chapter will introduce you to the both of these system boot methods.
4.5.1 Downloading EBOOT to NAND Flash
EBOOT can be downloaded to NAND Flash
by using “sfh_OMAP-L138.exe” tool (.net framework
is require
to run this utility; you can download.net framework “dotNetFx40_Full_x86_x64.exe” from
Microsoft).
1) Make sure you have connected the evaluation board to the PC using serial cable.
2) DIP Switch settings; S7-3 and S7-4 should be ON, other switch should be OFF.
Figure 4-2
3) Copy the folder
“bin” from the CD folder [CD\WINCE600\tools] to the folder [D:\sbc8018].
4) Now according to your LCD screen size, copy the
“EBOOTNANDFLASH.nb0” from the CD
folder [WINCE600\Image\4_3INCH or WINCE600\image\7INCH] to the folder
[D:\sbc8018\bin].
5) Now start the Windows Command Prompt; Click Start -> All Programs -> run, and input
“CMD” on the pop-up dialog to enter Windows Command Prompt(cmd.exe), now enter the
Summary of Contents for SBC8018
Page 35: ...35 Copyright 2011 by element14 User Manual Figure 3 4 3 Select USB Gadget Support Figure 3 5...
Page 87: ...87 Copyright 2011 by element14 User Manual Figure Appendix 2 15 Click OK Figure Appendix 2 16...
Page 91: ...91 Copyright 2011 by element14 User Manual Figure Appendix 2 23 Figure Appendix 2 24...
