- 57 -
Copyright © 2011 by element14
User Manual
For
4.3” LCD
If you are using 4.3” LCD screen modify the line as shown below at
[platform/SBC8018/SBC8018.bat]
set BSP_LCD43INCH=1
For
7” LCD
If you are using 7
” LCD screen modify the line as shown below at
[platform/SBC8018/SBC8018.bat]
set BSP_LCD43INCH=
The default installation path of the Windows Embedded CE 6.0 in this
context is [C:\WINCE600].
4.4.3 Sysgen & Build BSP
For “sysgen” and to build the BSP please follow the below steps:
1) Open the existing project file OMAPL138_AM18X_SAMPLE.sln located at
[C:\WINCE600\OSDesigns\OMAPL138_AM18X_SAMPLE].
2) Click [Build-> Build Solution] in vs2005 to
“sysgen” and build BSP.
3)
Once you finish “sysgen” and build process, “EBOOTNANDFLASH.nb0”, “NK.bin”,
“NK.nb0” will be created at the directory location
[C:\WINCE600\OSDesigns\OMAPL138_AM18X_SAMPLE\OMAPL138_AM18X_SAMPL
E\RelDir\OMAPL138_AM18X_ARMV4I_Release]
. Now copy
“EBOOTNANDFLASH.nb0”
to the directory [D:\sbc8018\bin] and copy
“NK.bin”, “NK.nb0” to the TF card (FAT/FAT32
format).
4) Now to update the system image please refer to the section 4.5 below
“How to Update
the System Image”
Summary of Contents for SBC8018
Page 35: ...35 Copyright 2011 by element14 User Manual Figure 3 4 3 Select USB Gadget Support Figure 3 5...
Page 87: ...87 Copyright 2011 by element14 User Manual Figure Appendix 2 15 Click OK Figure Appendix 2 16...
Page 91: ...91 Copyright 2011 by element14 User Manual Figure Appendix 2 23 Figure Appendix 2 24...
