- 38 -
Copyright © 2011 by element14
User Manual
Windows XP -> Start -> All Programs -> Texas Instruments -> AISgen for D800K006 -> UART Boot
Host
Add u-boot-uart-ais.bin [Directory: CD\linux\image\
] to the “AIS-File” as below:
Figure 3-9
3)
Click the “Start” and power ON the evaluation board to boot-up from serial port.
4) Wait for momen
t, the target window will display “(Serial Port): Closing COM1.”, close the tool
and open the Hyperterminal to catch the serial port information.
User should open Hyperterminal and Input any key to enter U-BOOT
prompts in three seconds, or else U-BOOT will load default parameter.
3.5.2 How Update Images From Ethernet
The SBC8018 evaluation board image can be updated through Ethernet port as well, in thi section
we will explain how to update the image using Ethernet port.
Below IP will be taken as an example;
PC: 192.192.192.154
Evaluation board: 192.192.192.215
1) PC TFTP service
Summary of Contents for SBC8018
Page 35: ...35 Copyright 2011 by element14 User Manual Figure 3 4 3 Select USB Gadget Support Figure 3 5...
Page 87: ...87 Copyright 2011 by element14 User Manual Figure Appendix 2 15 Click OK Figure Appendix 2 16...
Page 91: ...91 Copyright 2011 by element14 User Manual Figure Appendix 2 23 Figure Appendix 2 24...
