Embest AM3517, User Manual

Page: 51 / 76

SD/MMC/SDIO driver
DM9000 network card driver
USB OTG driver
USB EHCI driver
VRFB driver
DSPLINKK/CMEMK driver
GPIO keyboard driver
PWM(TPS65930)driver
ADC(TPS65930)driver
ONENAND driver
SMSC911X network card driver
CAN driver
Buzzer drive
Power management module
Backlight driver
Battery driver
Sleep / wake-up button driver
Expansion of power management
Application module
Flash Plug-in and Flash player
MP3/MPEG4/H264 DSP Hardware decoder
BSPINFO(control panel)
CETK
4.2 WinCE system quick start
4.2.1 system boot
When you boot the board and operate the system, you may use the terminal,
Please open PC Window Hyper terminal software and set the following:

Baud rate: 115200

Data bit: 8

Parity check: no

Stop bit: 1

Flow control: no
4.2.1.1 Boot from Nand Flash
NAND Flash system in the renewal of the reference image methods, please refer to
【
4.4.2
Update the image for NAND Flash
】
.