Important notes
Safety information
Damaged devices must not be used.
The device must only be connected by a
specialist in compliance with the pertinent
rules and the state building regulations.
The cables must not come into contact with hot
cooking surfaces.
The extractor fan must not be used for
extracting dangerous substances or fumes.
The user is responsible for ensuring the perfect
condition and proper use of the device.
Never operate the device without a fat filter. Only
ever operate the device under supervision.
The device is only suitable for use in the
home and must not be used for other
purposes or for commercial/industrial use.
Follow the installation instructions.
Please note that the filters must be cleaned
regularly, overly fatty filters pose a risk of
fire!
Do not clean the device with a steam cleaner
or pressurised water as there is a risk of short-
circuiting.
The device must be disconnected from the
power supply or de-energised using an
upstream fuse before performing maintenance
work.
Risk of fire! You must not flambé food when the
extractor fan is operating.
Do not place any objects on top of the device.
Should the device be used together with a gas
hob, a safety switch is required which only
allows the air to be extracted in the upper
position.
Warranty claims cannot be asserted for any
damage which results
from failure to observe these instructions.
We reserve the right to make technical changes.
Before using for the first time
Before putting the device into use, please note
the information below:
Read the assembly and operating instructions
carefully before using for the first time.
Read the information on hazards.
Remove the protective film and clean the body
of the hood as dirt particles which enter the
guide of the hood part can result in the housing
becoming scratched.
Before using for the first time, check that the
power connection is OK and that none of the
electrical connections are damaged.
Equipment
Extractor fan
Assembly plate for cover
Metal fat filter
Filter key
External control panel or remote control
2 mounting brackets
Assembly and operating instructions
Only for extraction models
2 foot extensions
2 covers for inspection openings
Special accessories
Remote control
Stainless steel cover Installation
frame for laminate work
surfaces
Substructure frame for glass work surfaces
Safety switch for gas hobs
Round suction connector for connection to
the front or back
Rectangular suction connector with round end for
connection to the left, right or bottom
1
