EMAK PW 146C, Operators Instruction Book

Page: 7 / 56

7
person with professional training who is authorised to check, install and repair electrical equipment
correctly and according to current regulations in the country where the water cleaner is installed.
• Total Stop: this stops operation of the water cleaner every time the control lever on the cleaner gun
is released.
• easy Start: this aids starting up the water cleaner by lowering the pressure for the first moments of
its operation.
2 F
eatures and
t
echnical
s
peciFications
PW 146C
eleCTRICAl CONNeCTION
Mains power supply
Absorbed power
Fuse
HydRAUlIC CONNeCTION
Maximum inlet water temperature
Minimum inlet water temperature
Minimum inlet water flow
Maximum inlet water pressure
Maximum priming depth
230 V / 1~50 Hz
2,3 kW
16 A
40 °C / 98 °F
5 °C / 41 °F
600 l/h / 159 US gph
0,8 MPa / 8 bar / 116 psi
0 m / 0 ft
PeRfORmANCe
Water flow
Maximum pressure
Recoil of cleaner gun
Sound level
Operator arm vibrations
480 l/h / 127 US gph
15 MPa / 150 bars / 2175 psi
15 N
77,3 dB (A)
1,31 m/s
2
WeIGHT ANd dImeNSION
Lenght x width x height 310 x 308 x 820 mm / 12 x 12 x 32 in
Weight 13 kg / 29 lb
Detergent bottle capacity 0,35 l / 0,09 US gal
All features and technical specifications are only indications. The Manufacturer reserves
the right to modify the appliance as it deems necessary.
2.1 I
dentIfIcatIon of
c
omponents
Please also refer to figures 1 to 2, which are located at the start of these operating and maintenance
instructions.
1 Electric power cord
2 Main switch
3 Handling bar
4 Housing for water gun / lance hose
5 Warning notice
6 Hose reel
7 Identification plate
8 Water outlet connector
9 Housing for foaming lance
10 Lifting handle
11 Lance with nozzle
12 Water inlet quick-fit connector 13 Housing for electric power cord
14 Water gun
17 Nozzle cleaning pin
18 Lance with rotating nozzle
19 Foaming lance
20 Detergent intake adjuster
21 Opening for detergent
23 High pressure hose
24 Quick fit connector for high-pressure hose
25 Safety catch on water gun lever
26 Water gun lever
27 Nozzle support head
2.2 s
afety
d
evIces
This water cleaner is provided with the following safety devices:
a) Thermal protector
It’s a device that stops the water cleaner operation in case of motor overheating.
In this case, proceed as follows:
EN