Troubleshooting
59
Owner’s Manual
Version 1.1
2
2
2
2
software used supports the multi channel feature of MME/
DirectSound.
•
Check if the option Low bandwidth mode: stereo 16 bit only in
either of the EMI 2|6 control panels is activated. If active,
EMI 2|6 playback is limited to two channels.
•
EMI 2|6 users on Mac OS should also check the ASIO
Control Panel, as the EMI 2|6 outputs can be switched from
stereo to 6 channel operation here, as well.
I can’t hear the monitor signal
•
The volume of the monitor signal can be set via the Recording
Gain fader in the Windows mixer. Check the setting of this
fader. Please refer to the Setting the Input Level section from
page 45 onwards.
Audio quality is poor in Windows 98 SE
•
Open
Control Panel > Multimedia > Audio
. For both Sound
Playback and Recording, click on the Advanced button. In
the ensuing windows, select the Performance tab, and
change the “Sample rate conversion quality” slider to
“Best”. This must be changed in both Performance tabs to
enhance the playback and recording audio quality.
Inserting a digital effects processor does not work
•
Typically, digital effects processors are not clock master
devices. They require an external synchronization signal
(the signal coming from the EMI 2|6). Set Clock Source on the
EMI 2|6 to Intern.
My digital recording is not bit-identical to the
original
•
Windows Millennium: If the connected digital source uses a
sampling rate that is different to that of the EMI 2|6, resam-
pling occurs in an attempt to match the rate used by the